PRODUCTS:

Bailers

Bottles, PFA, FEP, and PTFE

Cap Liners, TFE

Check/ Foot Valves, TFE

Filters, Inline, Syringe, Capsule

Gas Sampling Bags

Gloves, Nitrile

Labware

Liquid Sampling Bags/Liners

Rods, TFE

Sheets, TFE

Soil Sampling Syringes

Stirrer Magnets & Accessories

Surface Protector, Rolls

Transfer Cap Assemblies, PFA

Tubing

Join our Mailing List

* indicates required

Close

 

 
Search Catalog
      GO   
 All Categories    1-3/4" OD Heavy Duty Reusable Fluoropolymer Bailers and Components
Products of Fluoropolymers
& Other Non-Contaminating Materials
All Categories > Bailers > Fluoropolymer Reusable Bailers and Components > 1-3/4" OD Heavy Duty Reusable Fluoropolymer Bailers and Components > View Items  

1-3/4" OD Heavy Duty Reusable Fluoropolymer Bailers and Components

 
Check up to five results to perform an action.

Made of the most chemically Inert and non-contaminating materials available, FEP and PTFE. Contains no fillers or plasticizers, will not corrode or pit, is non-leaching, and complies with EPA regulations.
  • Flexi-Bottom Design Resists Leaks - Precision machined ball-valve seat minimizes leakage. Precision ground PTFE check valve is self-cleaning, to minimize fouling. Ball check valve design provides superior seating in wells with high silt content.
  • Interchangeable Parts - Mix and match parts make Jensen Inert Reusable Bailers ideal for both portable and dedicated applications. Various Top and Bottom options, as well as other accessories, allow you to expand and custom design your system to suit your individual needs.
  • Easy To Clean - All components easily dissemble for thorough cleaning, and quickly reassemble, so more of your time can be spent sampling. Rounded threads eliminate sharp angles where contamination collects and can be difficult to remove.
  • Sturdy Design - Jensen Inert Reusable Fluoropolymer Bailers are built withstand tough conditions encountered in the field. Bailer walls are 1/8" thick Clear FEP, which will not collapse or crack, even after repeated use. Tops are designed to resist weakening where the suspension cord is attached. Bottoms have extra material below the check valve to protect the ball and its seat from scratches, which could result in leaks. Bailers can rest upright with ball seated.
  • Slim Outside Diameter - Your Jensen Inert Reusable Fluoropolymer Bailer will fit into virtually any 2" well shaft, due to its slim outside diameter of only 1-3/4".
  • Quality Assurance - All components are precision machined for exact fit, eliminating costly extra seals. No oils or other lubricants are used in the manufacturing process. All bailers are leak tested, washed in phosphate free detergent and visually inspected prior to shipping.
  • Also Available: 1" OD, 3/4" OD and 7/16" Reusable Bailers

Search Items



    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  
Compare Items
   
  Results 1 - 25 of 25 1 

Catalog Number

Item Descripiton

Material

Overall Length

Capacity
BAI-0350-SO Bailer with Side Openings (2) on Top and Open Bottom - Ball Free to Roll Inside Bailer Fluoropolymer 14-1/2 Inch 350 cc
BAI-0350-SP Bailer with Side Openings (2) on Top and Bottom with Pin - Captive Ball Inside Bottom Fluoropolymer 14-1/2 Inch 350 cc
BAI-0700-SO Bailer with Side Openings (2) on Top and Open Bottom - Ball Free to Roll Inside Bailer Fluoropolymer 26-1/2 Inch 700 cc
BAI-0700-SP Bailer with Side Openings (2) on Top and Bottom with Pin - Captive Ball Inside Bottom Fluoropolymer 26-1/2 Inch 700 cc
BAI-1050-SO Bailer with Side Openings (2) on Top and Open Bottom - Ball Free to Roll Inside Bailer Fluoropolymer 38-1/2 Inch 1050 cc
BAI-1050-SP Bailer with Side Openings (2) on Top and Bottom with Pin - Captive Ball Inside Bottom Fluoropolymer 38-1/2 Inch 1050 cc
BAI-0350-B Bailer Body, 350cc Capacity, 12" Long x 1 3/4" O.D. Fluoropolymer 12 to 20 Inch 350 cc
BAI-0700-B Bailer Body, 700cc Capacity, 24" Long x 1 3/4" O.D. Fluoropolymer 24 Inch 700 cc
BAI-1050-B Bailer Body, 1050cc Capacity, 36 1/8" Long x 1 3/4" O.D. Fluoropolymer 36-1/8 Inch 1050 cc
BAI-1100-S Standard Top, Dual Side Opening Style Fluoropolymer N/A N/A
BAI-1120-C Check Valve Top - For Point Sampling Fluoropolymer N/A N/A
BAI-1200-O Standard Bottom - Allows Ball to Roll Fluoropolymer N/A N/A
BAI-1200-P Standard Bottom with Captive Ball Fluoropolymer N/A N/A
BAI-1240-V Variable Flow Bottom - Complete Fluoropolymer N/A N/A
BAI-1240-S Variable Flow Bottom, Stopcock Only Fluoropolymer N/A N/A
BAI-1240-B Variable Flow Bottom, Body Only Fluoropolymer N/A N/A
BAI-1240-Q Variable Flow Bottom Quick Emptying Bottom Adapter Fluoropolymer N/A N/A
BAI-1300-B Ball, 1 inch Diameter for Bottom Fluoropolymer N/A N/A
BAI-1400-E Extension Coupling - Joins Bailer Body Fluoropolymer N/A N/A
BAG-0319-10 Bailer Bag, Poly, 3 mil x 19 inch Long/10 Bag Polyethylene N/A N/A
BAG-0330-10 Bailer Bag, Poly, 3 mil x 30 inch Long/10 Bag Polyethylene N/A N/A
BAG-0345-10 Bailer Bag, Poly, 3 mil x 45 inch Long/10 Bag Polyethylene N/A N/A
SUS-3320-W Suspension Wire, FEP Covered/Ft Fluorinated Ethylene Propylene (FEP) N/A N/A
SUS-CAP-S FEP Shrink End Caps for Suspension Wire Fluorinated Ethylene Propylene (FEP) N/A N/A
SPO-3320 Empty Spool for Suspension Wire Plastic N/A N/A
  Results 1 - 25 of 25 1 

Home | About Us | Technical Info | Tradeshows | Product News | Contact Us

Jensen Inert Products • 3773 NW 126th Ave. Building 1 • Coral Springs, Florida 33065
Toll Free: 1-800-446-3781 • Tel: 954-344-2006 • Fax: 954-344-2008
Email: jensen@jenseninert.com

At Jensen Inert Products customer service and satisfaction are our main objectives; therefore, if we can be of further assistance, please feel free to contact us:

Tedlar® is a registered trademark of E.I. DuPont.