3/4" O.D. Heavy Duty Reusable Fluoropolymer Bailers and Components On Jensen Inert Products


All Categories > Bailers > Fluoropolymer Reusable Bailers and Components > 3/4" O.D. Heavy Duty Reusable Fluoropolymer Bailers and Components > View Items


	3/4" O.D. Heavy Duty Reusable Fluoropolymer Bailers and Components
	Check up to five results to perform an action.

	larger image		Made of the most chemically Inert and non-contaminating materials available, FEP and PTFE. Contains no fillers or plasticizers, will not corrode or pit, is non-leaching, and complies with EPA regulations. Flexi-Bottom Design Resists Leaks - Precision machined ball-valve seat minimizes leakage. Precision ground PTFE check valve is self-cleaning, to minimize fouling. Ball check valve design provides superior seating in wells with high silt content. Interchangeable Parts - Mix and match parts make Jensen Inert Reusable Bailers ideal for both portable and dedicated applications. Various Top and Bottom options, as well as other accessories, allow you to expand and custom design your system to suit your individual needs. Easy To Clean - All components easily dissemble for thorough cleaning, and quickly reassemble, so more of your time can be spent sampling. Rounded threads eliminate sharp angles where contamination collects and can be difficult to remove. Sturdy Design - Jensen Inert Reusable Fluoropolymer Bailers are built withstand tough conditions encountered in the field. Bailer walls are 1/8" thick Clear FEP, which will not collapse or crack, even after repeated use. Tops are designed to resist weakening where the suspension cord is attached. Bottoms have extra material below the check valve to protect the ball and its seat from scratches, which could result in leaks. Bailers can rest upright with ball seated. Quality Assurance - All components are precision machined for exact fit, eliminating costly extra seals. No oils or other lubricants are used in the manufacturing process. All bailers are leak tested, washed in phosphate free detergent and visually inspected prior to shipping. Also Available: 1-3/4" OD, 1" OD and 7/16" Reusable Bailers

Results Per Page :


Results 1 - 14 of 14		1

Catalog Number	Item Descripiton	Material	Overall Length	Capacity

BAI-0050-OP	Bailer with Open Style Top and Bottom with Pin - Captive Ball Inside Bottom	Fluoropolymer	14 1/4 Inch	50 cc

BAI-0180-OP	Bailer with Open Style Top and Bottom with Pin - Captive Ball Inside Bottom	Fluoropolymer	40 Inch	155 cc

BAI-0050-B	Bailer Body, 50 CC Capacity, 13 inch Long x 3/4 inch O.D	Fluoropolymer	13 Inch	50 cc

BAI-0180-B	Bailer Body, 155 CC Capacity, 40 inch Long x 3/4 inch O.D	Fluoropolymer	38 Inch	155 cc

BAI-0075-O	Standard Top, Open Style	Fluoropolymer	N/A	N/A

BAI-0175-P	Standard Bottom with Captive Ball	Fluoropolymer	N/A	N/A

BAI-0034-V	Variable Flow Bottom - Complete	Fluoropolymer	N/A	N/A

BAI-0034-S	Variable Flow Bottom, Stopcock Only	Fluoropolymer	N/A	N/A

BAI-0034-B	Variable Flow Bottom, Body Only	Fluoropolymer	N/A	N/A

BAI-0104-B	Ball, 1/4 inch Diameter for Bottoms	Fluoropolymer	N/A	N/A

BAG-0319-10	Bailer Bag, Poly, 3 mil x 19 inch Long/10 Bag	Polyethylene	N/A	N/A

BAG-0345-10	Bailer Bag, Poly, 3 mil x 45 inch Long/10 Bag	Polyethylene	N/A	N/A

SUS-3320-W	Suspension Wire, FEP Covered/Ft	Fluorinated Ethylene Propylene (FEP)	N/A	N/A

SUS-CAP-S	FEP Shrink End Caps for Suspension Wire	Fluorinated Ethylene Propylene (FEP)	N/A	N/A


Results 1 - 14 of 14	1

Jensen Inert Products • 3773 NW 126th Ave. Building 1 • Coral Springs, Florida 33065
Toll Free: 1-800-446-3781 • Tel: 954-344-2006 • Fax: 954-344-2008
Email: jensen@jenseninert.com

At Jensen Inert Products customer service and satisfaction are our main objectives; therefore, if we can be of further assistance, please feel free to contact us:

Tedlar® is a registered trademark of E.I. DuPont.

Join our Mailing List

3/4" O.D. Heavy Duty Reusable Fluoropolymer Bailers and Components

Catalog Number

Item Descripiton

Material

Overall Length

Capacity