PRODUCTS:

Bailers

Bottles, PFA, FEP, and PTFE

Cap Liners, TFE

Check/ Foot Valves, TFE

Filters, Inline, Syringe, Capsule

Gas Sampling Bags

Gloves, Nitrile

Labware

Liquid Sampling Bags/Liners

Rods, TFE

Sheets, TFE

Soil Sampling Syringes

Stirrer Magnets & Accessories

Surface Protector, Rolls

Transfer Cap Assemblies, PFA

Tubing

Join our Mailing List

* indicates required

Close

 

 
Search Catalog
      GO   
 All Categories    PFA Transfer Cap Assembly
Products of Fluoropolymers
& Other Non-Contaminating Materials
All Categories > Transfer Cap Assemblies, PFA > PFA Transfer Cap Assembly > View Items  

PFA Transfer Cap Assembly

 
Check up to five results to perform an action.

FOR ORGANIC TRAP BOTTLES

Each assembly has two PFA transfer ports, each with a threaded PFA ferrule nut to tighten onto 1/4" OD tubing. These two transfer ports are molded into a PFA insert which covers and seals the mouth of the bottle when the cap is screwed on over it. One port allows 1/4" OD tubing to pass through the port and extend as far into the bottle as desired.

The assembly includes a plastic cap to fit the bottle, and two pieces of 1/4" OD Fluoropolymer tubing. One piece is inserted through one port to the bottom of the bottle and the other piece stops at the port above the liquid level in the bottle. Four cap sizes are available.




    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  
Compare Items
   
  Results 1 - 13 of 13 1 

Catalog Number

Item Descripiton

Material

Size

Fits Cap Size
TCT2X14-38430 Complete Assembly for Cap Size 38-430 Perfluoroalkoxy Alkanes (PFA) 38-430 38-430 mm
TCT2X14-33430 Complete Assembly for Cap Size 33-430 Perfluoroalkoxy Alkanes (PFA) 33-430 33-430 mm
TCT2X14-33400 Complete Assembly for Cap Size 33-400 Perfluoroalkoxy Alkanes (PFA) 33-400 33-400 mm
TCT2X14-53400 Complete Assembly for Cap Size 53-400 Perfluoroalkoxy Alkanes (PFA) 53-400 53-400 mm
CAP38430P Extra Plastic Bottle Cap modified for Assembly 38-430 Plastic 38-430 38-430 mm
CAP33430P Extra Plastic Bottle Cap modified for Assembly 33-430 Plastic 33-430 33-430 mm
CAP33400P Extra Plastic Bottle Cap modified for Assembly 33-400 Plastic 33-400 33-400 mm
CAP53400P Extra Plastic Bottle Cap modified for Assembly 53-400 Plastic 53-400 53-400 mm
GTP015-38430 Gasket, Fluoropolymer, for 38-430 Cap Fluoropolymer 38-430 38-430 mm
GTP015-33430 Gasket, Fluoropolymer, for 33-430 Cap Fluoropolymer 33-430 33-430 mm
GTP015-33400 Gasket, Fluoropolymer, for 33-400 Cap Fluoropolymer 33-400 33-400 mm
GTP010-53400 Gasket, Fluoropolymer, for 53-400 Cap Fluoropolymer 53-400 53-400 mm
TFI0316-030 FEP Fluoropolymer Tubing 3/16 inch ID x 1/4 inch OD/ft. Fluorinated Ethylene Propylene (FEP) 3/16" ID X 1/4" OD ALL mm
  Results 1 - 13 of 13 1 

Home | About Us | Technical Info | Tradeshows | Product News | Contact Us

Jensen Inert Products • 3773 NW 126th Ave. Building 1 • Coral Springs, Florida 33065
Toll Free: 1-800-446-3781 • Tel: 954-344-2006 • Fax: 954-344-2008
Email: jensen@jenseninert.com

At Jensen Inert Products customer service and satisfaction are our main objectives; therefore, if we can be of further assistance, please feel free to contact us:

Tedlar® is a registered trademark of E.I. DuPont.