Catalog Number GSFNTFEV-2424, 24 x 24 Inch (in) Size FEP Gas Sampling Bag with PTFE ON/OFF Valve with Stopcock On Jensen Inert Products


All Categories > Bags, Gas and Liquid Sampling > FEP Gas Sampling Bags > FEP Gas Sampling Bags with PTFE ON/OFF Valve with Stopcock > Catalog Number GSFNTFEV-2424


	Catalog Number GSFNTFEV-2424, 24 x 24 Inch (in) Size FEP Gas Sampling Bag with PTFE ON/OFF Valve with Stopcock

Gas Sampling Bags with PTFE ON/OFF Valve with Stopcock

larger image

Specifications · Note · Additional Information · Valve/Fitting Features · Film Key Features · Suggestion · Film Properties · Film Advantages · Film Limitations · Valve/Fitting Benefits

Specifications

Film Material		FEP

Capacity		40.0 L

Size		24 x 24 in

Film Thickness		0.005 in

Bags Per Package		5

Use with Tubing Size (ID)		3/16 in 1/4 in

Minimum Order Quantity		5

Note

Valve is 100% Inert Virgin PTFE.
Locking Combo^® is a registered trademark of Jensen Inert Products, Inc.
Swagelok^® is a register trademark of Swagelok, Inc.
Jaco^® is a registered trademark of Jaco Manufacturing, Inc.
HR^® is a registered trademark of Halkey Roberts, Inc.
Tedlar^® is a registered trademark of E.I. Dupont

Additional Information

Optional Cap with Septum available. Add SC to the end of part number for this option.

Valve/Fitting Features

Valve is 100% Inert Virgin PTFE
All wetted parts are 100% Virgin PTFE
Optional Cap with Septum available

Film Key Features

FEP is one of the most chemically inert materials for making gas sampling bags. It works well in extreme temperatures ranging from -400 to 400 ºF; allowing it to be used in most stack sampling conditions. 5 mil FEP film is completely resistant to the most severe corrosives. Much more permeable than Multi-Layer or Tedlar®. FEP bags can be specified for applications involving corrosive gases.

Suggestion

Before use, thoroughly flush bags with ultra-pure nitrogen or zero air
During sampling, Fluoropolymer tubing and Fluoropolymer faced septums must be used in order to prevent sample loss.
Bags should not be filled to more than 80% of their maximum volume.
Charcoal (Black) Tedlar^® bags should be used when sampling light sensitive compounds
Do not store compounds in bags long term due to the possibility that chemicals may adsorb onto the bag surface.
Bags should not be used to collect reactive or unstable compounds.
When shipping bags, do not air-ship unless the bags are stored in a pressurized area.

Film Properties

One of the most chemically inert materials available for making gas sampling bags
Maximum operating temperature: 400 ºF
Virtually transparent

Film Advantages

Works well in extreme temperatures ranging from -400 to 400 ºF; allowing it to be used in all stack sampling conditions
Heavier gauge (0.005) film is resistant to most severe corrosives as well as tolerates applications involving rough handling or difficult service conditions
Less expensive than PFA

Film Limitations

Poor long term storage stability for most VOC's and sulfur compounds
Much more permeable than Tedlar^®, ALTEF, and Multi-Layer Foil bags
More expensive than Tedlar^®, ALTEF, Multi-Layer Foil, and TFM bags
Lower tensile strength than Tedlar^®

Valve/Fitting Benefits

All wetted parts are 100% Virgin PTFE
PTFE Washer placed inside bag film
Optional Cap with Replaceable Septum available

MORE IMAGES


	· FEP Gas Sampling Bags, PTFE On/Off Valve with Stopcock

	· FEP Gas Sampling Bags, PTFE On/Off Valve with Stopcock - 2

DOWNLOADS


		Gas Sampling Bag Product Sheet (PDF, 578KB)

		Fitting Features and Benefits (PDF, 755KB)

Jensen Inert Products • 3773 NW 126th Ave. Building 1 • Coral Springs, Florida 33065
Toll Free: 1-800-446-3781 • Tel: 954-344-2006 • Fax: 954-344-2008
Email: jensen@jenseninert.com

At Jensen Inert Products customer service and satisfaction are our main objectives; therefore, if we can be of further assistance, please feel free to contact us:

Tedlar® is a registered trademark of E.I. DuPont.

Join our Mailing List

Catalog Number GSFNTFEV-2424, 24 x 24 Inch (in) Size FEP Gas Sampling Bag with PTFE ON/OFF Valve with Stopcock

Film Material

Capacity

Size

Film Thickness

Bags Per Package

Use with Tubing Size (ID)

Minimum Order Quantity