FEP Gas Sampling Bags On Jensen Inert Products


	FEP Gas Sampling Bags
	FEP is one of the most chemically inert materials for making gas sampling bags. It works well in extreme temperatures ranging from -400 to 400°F; allowing it to be used in most stack sampling conditions. Much more permeable than Multi-Layer or Tedlar^®. Heavier gauge (0.005") film is resistant to most severe corrosives as well as tolerates applications involving rough handling or difficult service conditions. Virtually transparent. For more information about FEP Gas Sampling Bags, please click the links below: Gas Sampling Bag Product Sheet Choosing the Best Film Valve and Fittings Features and Benefits

	Click on a Product to view details.


		FEP Gas Sampling Bags with Screw Cap Combo Valve with Septum (18) POLYPROPYLENE SCREW CAP COMBO VALVE WITH REPLACEABLE SEPTUM On/Off valve function with a replaceable septum in a single unit is economical. Lightweight, making it easier to carry in the field and reduces shipping costs. Made of inert polypropylene to ensure purity of sample and non-contamination. Quick, easy opening and closing of valve to save time. Cap stop limits amount cap can be opened to stop leaks from opening cap too far. Visual confirmation that valve is open or closed, prevents accident sample loss. No guessing whether valve is open or closed. Valve Stem is 3/16" OD with tapered outer end for tubing or compression fitting. Replaceable fluoropolymer faced, low ...




		FEP Gas Sampling Bags with Locking Combo^® Valve with Septum (18) POLYPROPYLENE LOCKING COMBO^® VALVE WITH SEPTUM On/Off valve function with septum in a single unit is economical. Lightweight, making it easier to carry in the field and reduces shipping costs. Made of inert polypropylene to ensure purity of sample and non-contamination. Push/Pull (On/Off) valve stem for quick, easy opening and closing of valve (< 1 second). Faster than "twist action" valves. Quick locking function, in closed position. Locked position is easy to verify visually, and prevents accidental sample loss during shipment Virtually impossible to open or close valve too far Valve Stem is 3/16" diameter Fluoropolymer faced septum, with Ultra-low bleed ...




		FEP Gas Sampling Bags with Nickel Plated HR^® ON/OFF Valve with 1/4'' Diameter Barbed Stem (18) NICKEL PLATED HR^® ON/OFF VALVE WITH 1/4" DIAMETER BARBED STEM Nickel Plated to resist damage from most aggressive chemicals. 1/4" Barbed Stem for attaching tubing, helps keep tubing in place. Leak resistant seal in closed position, prevents sample loss. However, when stem is not closed, sample air passes into the ambient air outside valve.




		FEP Gas Sampling Bags with 1/4" Plastic Jaco^® Fitting with Fluoropolymer Faced Septum (18) PLASTIC JACO^® FITTING FOR 1/4" TUBING OR SEPTUM Polypropylene molded construction is inexpensive compared to metal fittings. Replaceable fluoropolymer faced septum with large area, allows repeated punctures with common lab syringes. Allows reuse of valve by only replacing septum. Option of cap with septum or cap for use with tubing. Allows syringe sample extraction or attachment of tubing by changing caps Compression ferrule secures tubing onto fitting, which provides a superior grip compared to metal fittings Standard Jaco can be used with 1/4" tubing. Jaco for 1/2" and 3/8" tubing also available




		FEP Gas Sampling Bags with 3/8" Plastic Jaco^® Fitting with Fluoropolymer Faced Septum (18) PLASTIC JACO^® Fitting for 3/8" Tubing or Septum Polypropylene molded construction is inexpensive compared to metal fittings. Replaceable fluoropolymer faced septum with large area, allows repeated punctures with common lab syringes. Allows reuse of valve by only replacing septum. Option of cap with septum or cap for use with tubing. Allows syringe sample extraction or attachment of tubing by changing caps Compression ferrule secures tubing onto fitting, which provides a superior grip compared to metal fittings Prices include Jaco fitting for 3/8" OD tubing or septum. Bags with grommets available. Bags with multiple fittings available. Custom sized ...




		FEP Gas Sample Bags with Nickel Plated HR^® ON/OFF Valve with 1/4'' Diameter Barbed Stem & Separate Plastic 1/4" Jaco^® Fitting with Fluoropolymer Faced Septum (18) NICKEL PLATED HR^® ON/OFF VALVE WITH 1/4" DIAMETER BARBED STEM AND SEPARATE PLASTIC JACO^® FITTING WITH FLUOROPOLYMER FACED SEPTUM You get the features of both the HR^® Valve and the Jaco^® Fitting on one bag HR^® Features: Nickel Plated to resist damage from most aggressive chemicals 1/4" Barbed Stem for attaching tubing, helps keep tubing in place Leak resistant seal in closed position, prevents sample loss. However, when stem is not closed, sample air passes into the ambient air outside valve Jaco^® Features: Polypropylene molded construction is inexpensive compared to metal fittings Replaceable fluoropolymer ...




		FEP Gas Sampling Bags with Stainless Steel Swagelok^® Type Fitting for 1/4" OD Tubing (18) STAINLESS STEEL SWAGELOK^® TYPE FITTING FOR 1/4" OD TUBING Stainless Steel construction provides durability and ability to withstand use in austere sampling conditions. Option of cap for tubing or septum, allows attachment of tubing or syringe sample extraction by switching caps Replaceable fluoropolymer faced septum with large area, allows repeated punctures with common lab syringes. Allows reuse of valve by only replacing septum




		FEP Gas Sampling Bags for EPA TCLP Method with Single Stainless Steel Septum Fitting (18) STAINLESS STEEL TCLP FITTING WITH REPLACEABLE SEPTUM Stainless Steel body construction with aluminum cap provides durability and withstands use in austere sampling conditions. Sample contacts only stainless steel Lower cost compared to 1/4" Swagelok^® type fittings and Nickel Plated Halkey^® Roberts fitting Designed for use with Zero Headspace Extractors, validated fitting style for EPA TCLP (Toxicity Characteristic Leaching Procedure) method




		FEP Gas Sampling Bags with PFA Fitting for 1/4" OD Tubing (19) PFA FITTING FOR 1/4" OD TUBING OR SEPTUM PFA Fluoropolymer construction so sample only comes into contact with high purity, inert PFA, the ultimate in chemical resistance and non-contaminating material Option of cap for tubing to allow attachment of tubing or cap with septum to allow syringe sample extraction by changing caps. Replaceable fluoropolymer faced septum with large area, allows repeated punctures with common lab syringes. Allows reuse of valve by only replacing septum




		FEP Gas Sampling Bags with PTFE ON/OFF Valve with Stopcock (18) PTFE ON/OFF VALVE WITH STOPCOCK Valve is 100% inert PTFE so sample only comes into contact with PTFE Valve stem approximately 1/4" OD for use with 1/4" or 3/16" ID tubing Optional septum with cap available




		FEP Gas Sampling Bags with Single Stainless Steel Push/Pull Valve (18) SINGLE STAINLESS STEEL PUSH/PULL VALVE Stainless Steel construction provides durability and ability to withstand use in austere sampling conditions. Push/Pull (On/Off) valve stem for quick, easy opening and closing of valve Aluminum collar locked on SS valve body and nut 3/16" diameter Stainless Steel stem




		FEP Gas Sampling Bags with Stainless Steel Push/Pull Valve and Separate Stainless Steel Septum Fitting with Replaceable Septum (18) STAINLESS STEEL PUSH/PULL VALVE AND SEPARATE STAINLESS STEEL SEPTUM FITTING WITH REPLACEABLE SEPTUM This combination of fitting and valve allows for use of Push/Pull valve for tubing and a separate fitting for septum use. Stainless Steel construction provides durability and ability to withstand use in austere sampling conditions. Replaceable fluoropolymer faced septum, allows repeated punctures with common lab syringes. Allows reuse of valve by only replacing septum Push/Pull (On/Off) valve stem for quick, easy opening and closing of valve Aluminum collar locked on SS valve body and nut+ 3/16" diameter Stainless Steel stem

Customers who purchased Gas Sampling Bags also purchased:


	FEP Standard and Heavy Wall Tubing

	C-Clamp® Sealing Kits for Liquid and Gas Sampling Bags

Jensen Inert Products • 3773 NW 126th Ave. Building 1 • Coral Springs, Florida 33065
Toll Free: 1-800-446-3781 • Tel: 954-344-2006 • Fax: 954-344-2008
Email: jensen@jenseninert.com

At Jensen Inert Products customer service and satisfaction are our main objectives; therefore, if we can be of further assistance, please feel free to contact us:

Tedlar® is a registered trademark of E.I. DuPont.