PRODUCTS:

Bailers

Bottles, PFA, FEP, and PTFE

Cap Liners, TFE

Check/ Foot Valves, TFE

Filters, Inline, Syringe, Capsule

Gas Sampling Bags

Gloves, Nitrile

Labware

Liquid Sampling Bags/Liners

Rods, TFE

Sheets, TFE

Soil Sampling Syringes

Stirrer Magnets & Accessories

Surface Protector, Rolls

Transfer Cap Assemblies, PFA

Tubing

Join our Mailing List

* indicates required

Close

 

 
Search Catalog
      GO   
 All Categories    C-Clamp® Sealing Kits for Liquid and Gas Sampling Bags
Products of Fluoropolymers
& Other Non-Contaminating Materials
All Categories > Bags, Gas and Liquid Sampling > C-Clamp® Sealing Kits for Liquid and Gas Sampling Bags > View Items  

C-Clamp® Sealing Kits for Liquid and Gas Sampling Bags

 
Check up to five results to perform an action.


Polyethylene C-Clamp® and Sealing Rods can be cut to any length. To make an airtight, leak-proof seal, place the C-Clamp®, open side up, on a clean, hard surface. Wrap the open bag end once over the round plastic sealing rod and push the rod down into the "C" shaped opening of the C-Clamp®, inserting the middle of the rod first, then moving outward toward each end. We recommend ordering C-Clamp® Sealing Kits at least 1" longer than the length of the bag end to be sealed. The Rod in each unit (kit) is longer than the C-Clamp®, for easy removal.

C-Clamp® Kits can be ordered in standard lengths to be cut by the end user to needed lengths or you can order to size by selecting the part numbers ending in "X1".



    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  
Compare Items
   
  Results 1 - 6 of 6 1 

Catalog Number

Item Descripiton

C®-Clamp Length

Nominal Rod Diameter

Rod Length
CPSBAGS-4038 39 Inch (in) Length C-Clamp® Sealing Kit for Liquid and Gas Sampling Bags 39 in 3/8 in 40 in
CPSBAGS-4414 43 Inch (in) Length C-Clamp® Sealing Kit for Liquid and Gas Sampling Bags 43 in 1/4 in 44 in
CPSBAGS-4818 47 Inch (in) Length C-Clamp® Sealing Kit for Liquid and Gas Sampling Bags 47 in 1/8 in 48 in
CPSBAGS-138X 3/8 Inch (in) Rod Diameter C-Clamp® Sealing Kit for Liquid and Gas Sampling Bags 1 to 39 in 3/8 in 2 to 40 in
CPSBAGS-118X 1/8 Inch (in) Rod Diameter C-Clamp® Sealing Kit for Liquid and Gas Sampling Bags 1 to 47 in 1/8 in 2 to 48 in
CPSBAGS-114X 1/4 Inch (in) Rod Diameter C-Clamp® Sealing Kit for Liquid and Gas Sampling Bags 1 to 43 in 1/4 in 2 to 44 in
  Results 1 - 6 of 6 1 

Home | About Us | Technical Info | Tradeshows | Product News | Contact Us

Jensen Inert Products • 3773 NW 126th Ave. Building 1 • Coral Springs, Florida 33065
Toll Free: 1-800-446-3781 • Tel: 954-344-2006 • Fax: 954-344-2008
Email: jensen@jenseninert.com

At Jensen Inert Products customer service and satisfaction are our main objectives; therefore, if we can be of further assistance, please feel free to contact us:

Tedlar® is a registered trademark of E.I. DuPont.