PRODUCTS:

Bailers

Bottles, PFA, FEP, and PTFE

Cap Liners, TFE

Check/ Foot Valves, TFE

Filters, Inline, Syringe, Capsule

Gas Sampling Bags

Gloves, Nitrile

Labware

Liquid Sampling Bags/Liners

Rods, TFE

Sheets, TFE

Soil Sampling Syringes

Stirrer Magnets & Accessories

Surface Protector, Rolls

Transfer Cap Assemblies, PFA

Tubing

Join our Mailing List

* indicates required

Close

 

Search Catalog
      GO   
 All Categories    Fluoropolymer VOA Extraction Device
Products of Fluoropolymers
& Other Non-Contaminating Materials
All Categories > Bailers > Fluoropolymer VOA Extraction Device > Catalog Number BAB-0304-4VC  

Catalog Number BAB-0304-4VC, FEP VOA Extraction Device with US EPA and FLDEP Special Cleaning


    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

VOA extraction device with Special cleaning procedure.




 Specifications   Fluropolymer VOA Extraction Device Note   

Features

Made Only of 100% Virgin FEP Fluoropolymer.

The most chemically inert, non-contaminating bailer available. Virgin FEP contains no fillers or plasticizers, will not corrode, is non-leaching, and complies with EPA regulations. No cements or solvents are used in making or assembling the bailers.

    Advantages:
  • Rapid drop rates - Approx. 3/4" diameter fill opening
  • Fast emptying - Open top design
  • Precleaned - Ready to use. No decon required
  • Transparent - For visual inspection of sample layers
  • Lightweight - Easy to carry, easy to lift, low shipping costs
  • Convenient - Individually packaged in sealed poly bags
  • Virtually leak free - PTFE ball seals tightly
  • Low cost - A fraction of the cost of reusable Fluoropolymer Bailers
  • No cross contamination - One time use eliminates exposing subsequent samples to substances which can't be removed through deconing
  • Minimal user exposure to toxic substances - Decon is not needed
  • For use in wells 2" I.D. or larger. Bailer O.D. is 1-9/16".
Weighted Versions Available with either Stainless Steel or PTFE Weights.

Quality Assurance:
All components are precision made for exact fit. No cements, glues, oils or other contaminants are used in the manufacturing process. All bailers are leak tested and visually inspected prior to shipping. Each bailer is individually packed in a polyethylene bag which contains no plasticizers.
    Factory Cleaning Procedure, Each Bailer is:
  1. Washed in Liquinox™
  2. Rinsed in DL water
  3. Air dried in a clean, closed room
  4. Sealed in a poly bag

Material

Fluorinated Ethylene Propylene (FEP)



Home | About Us | Technical Info | Tradeshows | Product News | Contact Us

Jensen Inert Products • 3773 NW 126th Ave. Building 1 • Coral Springs, Florida 33065
Toll Free: 1-800-446-3781 • Tel: 954-344-2006 • Fax: 954-344-2008
Email: jensen@jenseninert.com

At Jensen Inert Products customer service and satisfaction are our main objectives; therefore, if we can be of further assistance, please feel free to contact us:

Tedlar® is a registered trademark of E.I. DuPont.