PRODUCTS:

Bailers

Bottles, PFA, FEP, and PTFE

Cap Liners, TFE

Check/ Foot Valves, TFE

Filters, Inline, Syringe, Capsule

Gas Sampling Bags

Gloves, Nitrile

Labware

Liquid Sampling Bags/Liners

Rods, TFE

Sheets, TFE

Soil Sampling Syringes

Stirrer Magnets & Accessories

Surface Protector, Rolls

Transfer Cap Assemblies, PFA

Tubing

Join our Mailing List

* indicates required

Close

 

 
Search Catalog
      GO   
 All Categories    Tubing, FEP, PTFE, PFA, Polyethylene, FEP Lined Polyethylene, Silicone, Vinyl and Plastic Peristaltic Pump
Products of Fluoropolymers
& Other Non-Contaminating Materials
All Categories > Tubing, FEP, PTFE, PFA, Polyethylene, FEP Lined Polyethylene, Silicone, Vinyl and Plastic Peristaltic Pump  
 

Tubing, FEP, PTFE, PFA, Polyethylene, FEP Lined Polyethylene, Silicone, Vinyl and Plastic Peristaltic Pump

 

Click on a category to drill down.

fep tubing04

Fluoropolymer FEP Tubing


In addition to its low co-efficient of friction, FEP Tubing offers excellent performance at both low and high temperatures, along with outstanding resistance to most chemicals. It is a clear, translucent color.

FEP tubing is non-aging, nontoxic and non-allergenic. It maintains its stiffness, has excellent strength and is crack-resistant. FEP tubing has the best abrasion resistance of all the fluoropolymer tubings. It is chemically inert and heat resistant. It is bendable even at -454 degrees F.

Temperature range: - 400 degrees F to + 400 degrees F
Color: Translucent
Durometer: Shore D 56 ±5
Specifications: ASTM D-3295-81a
PTFE-TUBING

Fluoropolymer PTFE Tubing


In addition to its low co-efficient of friction, PTFE Tubing offers excellent performance at both low and high temperatures, along with outstanding resistance to most chemicals. It has a milky white color. PTFE tubing is non-aging, nontoxic and non-allergenic. It maintains its stiffness, has excellent strength, is crack-resistant and offers good shock and abrasion resistance. It has excellent dielectric properties. PTFE tubing is the most flexible of all the fluoropolymer tubings.
Temperature range: - 400 degrees F to + 500 degrees F
Color: Natural white
Durometer: Shore D 60 ±5
Specifications: ASTM D-3295-81a
pfa tubing03

Fluoropolymer PFA Tubing


PFA tubing has the same advantages as PTFE. The chemical resistance of PFA is comparable to PTFE. PFA is translucent and slightly flexible. PFA has a greater mechanical strength than PTFE. PFA resists aggressive chemicals and high temperature chemical processing. PFA has the lowest levels of metal ions of all Fluoropolymer tubing. PFA is the best for semiconductor piping applications. It is accepted for both liquid reagent and UPDI water handling in advanced processing applications.

Maximum operating temperature: + 500 degrees F
Melting temperature: 305 degrees C
Specifications: ASTM D-3295-81a
Plastic Peristaltic Pump Tubing

Peristaltic Pump Tubing
vinyl tubing2

Vinyl Tubing Laboratory Grade

(13)
  • Non-Toxic. Meets FDA Requirements.
  • Recommended for all laboratory and industrial uses where flexible vinyl tubing is applicable; for handling aqueous foods and other liquids, and for non-critical hospital use such as suction and drainage.
  • Produced entirely from FDA sanctioned ingredients. All compounding and manufacturing is performed using GMP, assuring consistency of quality and purity.
  • Highly flexible, for ease of handling.
  • Its smooth bore and clarity contribute to better material flow and easy observation of contents.
  • Not recommended for peristaltic pumps.
  • Recommended working pressure at room temperature only.
  • Pressure rating varies inversely with ...
Low Density (LD) Polyethylene Tubing

Polyethylene Tubing
cutaway-fep lined poly

FEP Lined Polyethylene Tubing

 Customers who purchased Tubing also purchased: 


High Capacity Groundwater Sampling Capsules Filters
High Capacity Groundwater Sampling Capsules Filters

LCV
FEP Gas Sampling Bags with Locking Combo® Valve with Septum

Home | About Us | Technical Info | Tradeshows | Product News | Contact Us

Jensen Inert Products • 3773 NW 126th Ave. Building 1 • Coral Springs, Florida 33065
Toll Free: 1-800-446-3781 • Tel: 954-344-2006 • Fax: 954-344-2008
Email: jensen@jenseninert.com

At Jensen Inert Products customer service and satisfaction are our main objectives; therefore, if we can be of further assistance, please feel free to contact us:

Tedlar® is a registered trademark of E.I. DuPont.