Labware, PFA, PTFE and FEP On Jensen Inert Products

Home | About Us | Technical Info | Product News | Contact Us

PRODUCTS:

Bailers

Bottles, PFA, FEP, and PTFE

Cap Liners, TFE

Check/ Foot Valves, TFE

Filters, Inline, Syringe, Capsule

Gas Sampling Bags

Gloves, Nitrile

Labware

Liquid Sampling Bags/Liners

Rods, TFE

Sheets, TFE

Soil Sampling Syringes

Stirrer Magnets & Accessories

Surface Protector, Rolls

Transfer Cap Assemblies, PFA

Tubing

Join our Mailing List

Search Catalog



	All Categories Labware, PFA, PTFE and FEP


	Products of Fluoropolymers & Other Non-Contaminating Materials


All Categories > Labware, PFA, PTFE and FEP


	Labware, PFA, PTFE and FEP

	Click on a category to drill down.


		Balls, PTFE (5) PTFE balls minimize "bumping" during boiling. They are inert and can be used up to 550 ºF (288 ºC). Each package contains100 balls. Choose from a variety of sizes. For column packing and mixing beds Resistant to most chemicals Non-contaminating




		Beading, PTFE (4) Use PTFE Beading as a cord or thread to sew mesh bags. Available in diameters from 0.028" to 0.094".




		Bottle Pourer, PTFE (4) Allows direct pouring in a safe and consistent manner Manufactured in pure, FDA approved, PTFE Totally chemically resistant and inert Safe & Reliable Sized to fit GL45, 38, 32 & 30 screw neck bottles Available with Blue, Red or Green caps, specify when ordering.




		Funnels




		Laboratory Matting, PTFE PTFE Laboratory Matting resists stains and adhesion of a wide range of materials and it is easy to clean. It can be used on benches, sinks, drain boards and shelves to reduce breakage of glassware. The laboratory matting has a diamond-shaped PTFE mesh and is 1/16" (1.6 mm) thick with 1/4" (6.35 cm) openings. Useful as a mesh bag for dipping parts in corrosive chemicals and solvents, it is also excellent as liner for cryogenic units. To create a bag, use PTFE Beading. Corrosion resistant Non-wettable Chemically inert




		Ladles, PTFE PTFE Ladles are totally chemically resistant and inert Shafts have a steel core, fully encapsulated in PTFE, for rigidity Suitable for sampling the most aggressive media




		Rod, Virgin PTFE (39) Jensen Inert has a full line of Virgin PTFE Rods, ranging from 9/64" to 4" in diameter. Priced per foot and standard lengths are 6'. Search Rod, Virgin PTFE - 39 Items




		Scoop, PTFE Totally chemically inert Overall length 140 mm Use up to 280 ºC




		Sieve, PFA Resistant to most chemicals, PFA Sieves are ideal for ultra-pure applications. The low surface energy of PFA facilitates quick drainage and clean up. Mesh size 1.0 mm. Use with containers that have openings of 80 mm or greater and a capacity ranging from 300 mL to 1000 mL. Non-contaminating and resistant to most chemicals Ideal for coarse sorting or draining of aggressive media Handle hooks over edge of vessel for draining




		Spray Nozzles, PTFE




		Stopcocks, PTFE (11) Wetted parts are PTFE only Medium vacuum pressure performance Plug cannot be accidently removed All PTFE stopcock - inert, grease-free and unbreakable Supplied with borosilicate side arms Search Stopcocks, PTFE - 11 Items




		Test Tube Racks, PTFE (4) Inert to virtually all chemical reagents Suitable for repeatedly sterilizing Suitable for ovens and high temperature thermostats Use from cryogenic to 250 ºC (480 ºF) Standard "foot print" : 180 mm x 60 mm




		Thermometer Holder/Probe, PTFE (16) Enables standard probes and thermometers to be assembled in standard taper laboratory glassware. The body is pure PTFE - fully adjustable with Viton^®seal. Contact materials are glass and PTFE only.




		Tweezers, PTFE (6) Inert to virtually all chemical reagents Completely non-contaminating Use up to 280 ºC (540 ºF) Super smooth non-stick surface Available with sharp end or square end

Jensen Inert Products • 3773 NW 126th Ave. Building 1 • Coral Springs, Florida 33065
Toll Free: 1-800-446-3781 • Tel: 954-344-2006 • Fax: 954-344-2008
Email: jensen@jenseninert.com

At Jensen Inert Products customer service and satisfaction are our main objectives; therefore, if we can be of further assistance, please feel free to contact us:

Tedlar® is a registered trademark of E.I. DuPont.