Jensen Inert Products
3773 NW 126th Ave. Building 1 Coral Springs, Florida 33065
Toll Free: 1-800-446-3781
Telephone: 954-344-2006 Fax: 954-344-2008
E-Mail: jensen@jenseninert.com
Web site:www.jenseninert.com
|
|
|
|
|
Catalog Number GST1000-2430J, 24 x 30 Inch (in) Size Tedlar® Gas Sampling Bags with Nickel Plated HR® ON/OFF Valve with 1/4" Diameter Barbed Stem
|
|
|
|
|
|
NICKEL PLATED HR® ON/OFF VALVE WITH 1/4" DIAMETER BARBED STEM- Nickel Plated to resist damage from most aggressive chemicals.
- 1/4" Barbed Stem for attaching tubing, helps keep tubing in place.
- Leak resistant seal in closed position, prevents sample loss. However, when stem is not closed, sample air passes into the ambient air outside valve.
- Prices include Nickel Plated HR® ON/OFF Valve.
- Use 3/16 ID tubing on stem.
- Bags with grommets available.
- Bags with multiple fittings available.
- Custom sized bags available.
|
|
|
|
|
|
|
|
|
Valve is Nickel Plated
Locking Combo® is a registered trademark of Jensen Inert Products, Inc.
Swagelok® is a register trademark of Swagelok, Inc.
Jaco® is a registered trademark of Jaco Manufacturing, Inc.
HR® is a registered trademark of Halkey Roberts, Inc.
Tedlar® is a registered trademark of E.I. Dupont
|
|
|
|
- Nickel Plated
- Barbed stem for attaching tubing.
- Leak resistant seal in closed position.
|
|
|
|
Tedlar® film has very low gas permeation levels for most compounds, and high tensile strength. Bags resist puncture in the field. 2 mil Tedlar® film is an economical alternative to FEP bags. Tedlar® is much less permeable than FEP and is unaffected by the chemical components of gases generally sampled, like carbon monoxide, sulfur dioxide, hydrogen sulfide, radon and mercaptans. Continuous use temperature from -98 to 400 ºF (temperature limit depends on fittings used). Required for many EPA testing methods.
|
|
|
|
- Before use, thoroughly flush bags with ultra-pure nitrogen or zero air
- During sampling, Fluoropolymer tubing and Fluoropolymer faced septums must be used in order to prevent sample loss.
- Bags should not be filled to more than 80% of their maximum volume.
- Charcoal (Black) Tedlar® bags should be used when sampling light sensitive compounds
- Do not store compounds in bags long term due to the possibility that chemicals may adsorb onto the bag surface.
- Bags should not be used to collect reactive or unstable compounds.
- When shipping bags, do not air-ship unless the bags are stored in a pressurized area.
|
|
|
|
- Low gas permeation levels - Most gases
- High tensile strength
- Withstands temperatures up to 400 ºF
- Unaffected by the chemical components of gases commonly sampled, like carbon monoxide, sulfur dioxide, hydrogen sulfide, radon, and mercaptons
- Tensile Strength 8000 psi
|
|
|
|
- Less permeable than FEP, PFA, and TFM
- Bags resist puncture in the field
- Less expensive than FEP, PFA, and TFM film
- Recommended in many EPA testing methods
|
|
|
|
- Exhibits background levels of DMAC and phenol
- High permeation rate for CO2
- Relatively high permeation rate for O2
- *NOTE: We offer bags specially conditioned to remove DMAC and phenol from Tedlar®
|
|
|
|
- Resists damage from most aggressive chemicals.
- Helps hold tubing in place.
- Prevents sample loss in closed position. However, when stem is not closed, sample air passes into ambient air outside valve.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
