Acid Purification System


Bottles, PFA, FEP, and PTFE

Cap Liners, TFE

Check/ Foot Valves, TFE

Filters, Inline

Gas Sampling Bags

Gloves, Nitrile

ICP-MS Agilent OEM Components


Liquid Sampling Bags/Liners

Rods, TFE

Rupture Membranes, PFA

Savillex molded PFA labware

Sheets, TFE

Soil Sampling Syringes

Stirrer Magnets & Accessories

Surface Protector, Rolls

Transfer Cap Assemblies, PFA


Join our Mailing List

* indicates required



Search Catalog
 All Categories    Fluropolymer Transfer Cap Assembly
Products of Fluoropolymers
& Other Non-Contaminating Materials
All Categories > Transfer Cap Assemblies, PFA > Fluropolymer Transfer Cap Assembly > View Items  

Fluropolymer Transfer Cap Assembly

Check up to five results to perform an action.

For Organic Trap Bottles
Each assembly has two PFA transfer ports, each with a threaded PFA ferrule nut to tighten onto 1/4 inch OD tubing. These two transfer ports are molded into a PFA insert which covers and seals the mouth of the bottle when the cap is screwed on over it. One port allows 1/4 inch OD tubing to pass through the port and extend as far into the bottle as desired.

The assembly includes a plastic cap to fit the bottle, and two pieces of 1/4 inch OD Fluoropolymer tubing. One piece is inserted through one port to the bottom of the bottle and the other piece stops at the port above the liquid level in the bottle. Four cap sizes are available.

    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
Compare Items
  Results 1 - 11 of 11 1 

Item #

Item Name


Mouth Type

TCT2X14-38430 Complete Assembly for Cap Size 38-430 Fluoropolymer N/A
TCT2X14-33430 Complete Assembly for Cap Size 33-430 Fluoropolymer N/A
TCT2X14-33400 Complete Assembly for Cap Size 33-400 Fluoropolymer N/A
TCT2X14-53400 Complete Assembly for Cap Size 53-400 Fluoropolymer Wide mouth
CAP38430P Extra Plastic Bottle Cap modified for Assembly 38-430 Fluoropolymer N/A
CAP33430P Extra Plastic Bottle Cap modified for Assembly 33-430 Fluoropolymer N/A
CAP33400P Extra Plastic Bottle Cap modified for Assembly 33-400 Fluoropolymer N/A
GTP015-38430 Gasket, Fluoropolymer, for 38-430 Cap Fluoropolymer N/A
GTP015-33430 Gasket, Fluoropolymer, for 33-430 Cap Fluoropolymer N/A
GTP015-33400 Gasket, Fluoropolymer, for 33-400 Cap Fluoropolymer N/A
TFI0316-030 FEP Fluoropolymer Tubing 3/16 inch ID x 1/4 inch OD/ft. FEP N/A
  Results 1 - 11 of 11 1 

Home | About Us | Technical Info | Tradeshows | Product News | Contact Us

Jensen Inert Products • 3773 NW 126th Ave. Building 1 • Coral Springs, Florida 33065
Toll Free: 1-800-446-3781 • Tel: 954-344-2006 • Fax: 954-344-2008

At Jensen Inert Products customer service and satisfaction are our main objectives; therefore, if we can be of further assistance, please feel free to contact us:

Tedlar® is a registered trademark of E.I. DuPont.