PRODUCTS:

Acid Purification System

Bailers

Bottles, PFA, FEP, and PTFE

Cap Liners, TFE

Check/ Foot Valves, TFE

Filters, Inline

Gas Sampling Bags

Gloves, Nitrile

ICP-MS Agilent OEM Components

Labware

Liquid Sampling Bags/Liners

Rods, TFE

Rupture Membranes, PFA

Savillex molded PFA labware

Sheets, TFE

Soil Sampling Syringes

Stirrer Magnets & Accessories

Surface Protector, Rolls

Transfer Cap Assemblies, PFA

Tubing

Join our Mailing List

* indicates required

Close

 

 
Search Catalog
      GO   
 All Categories    PFA Transfer Cap Assembly
Products of Fluoropolymers
& Other Non-Contaminating Materials
All Categories > Transfer Cap Assemblies, PFA > PFA Transfer Cap Assembly > Catalog Number TCT2X14-53400  

Catalog Number TCT2X14-53400, PFA Transfer Complete Cap Assembly for Cap Size 53-400

    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  



FOR ORGANIC TRAP BOTTLES

Each assembly has two PFA transfer ports, each with a threaded PFA ferrule nut to tighten onto 1/4" OD tubing. These two transfer ports are molded into a PFA insert which covers and seals the mouth of the bottle when the cap is screwed on over it. One port allows 1/4" OD tubing to pass through the port and extend as far into the bottle as desired.

The assembly includes a plastic cap to fit the bottle, and two pieces of 1/4" OD Fluoropolymer tubing. One piece is inserted through one port to the bottom of the bottle and the other piece stops at the port above the liquid level in the bottle. Four cap sizes are available.|For Organic Trap Bottles
Each assembly has two PFA transfer ports, each with a threaded PFA ferrule nut to tighten onto 1/4" OD tubing. These two transfer ports are molded into a PFA insert which covers and seals the mouth of the bottle when the cap is screwed on over it. One port allows 1/4" OD tubing to pass through the port and extend as far into the bottle as desired.

The assembly includes a plastic cap to fit the bottle, and two pieces of 1/4" OD Fluoropolymer tubing. One piece is inserted through one port to the bottom of the bottle and the other piece stops at the port above the liquid level in the bottle. Four cap sizes are available.





 Specifications   TCT2X14-53400 Note   

Material
PFA

Fits Cap Size
53-400 mm



 Customers who purchased Transfer Caps also purchased: 


Disposable Nitrile Gloves - Powder Free
Disposable Nitrile Gloves - Powder Free

500ml standard PFA jar
Standard PFA Jars

Home | About Us | Technical Info | Tradeshows | Product News | Contact Us

Jensen Inert Products • 3773 NW 126th Ave. Building 1 • Coral Springs, Florida 33065
Toll Free: 1-800-446-3781 • Tel: 954-344-2006 • Fax: 954-344-2008
Email: jensen@jenseninert.com

At Jensen Inert Products customer service and satisfaction are our main objectives; therefore, if we can be of further assistance, please feel free to contact us:

Tedlar® is a registered trademark of E.I. DuPont.