Acid Purification System


Bottles, PFA, FEP, and PTFE

Cap Liners, TFE

Check/ Foot Valves, TFE

Filters, Inline

Gas Sampling Bags

Gloves, Nitrile

ICP-MS Agilent OEM Components


Liquid Sampling Bags/Liners

Rods, TFE

Rupture Membranes, PFA

Savillex molded PFA labware

Sheets, TFE

Soil Sampling Syringes

Stirrer Magnets & Accessories

Surface Protector, Rolls

Transfer Cap Assemblies, PFA


Join our Mailing List

* indicates required



Search Catalog
 All Categories    FEP Bench/Surface Protector All Purpose
Products of Fluoropolymers
& Other Non-Contaminating Materials
All Categories > Surface Protector Rolls > Catalog Number PROT18-2515  

Catalog Number PROT18-2515, FEP Bench/Surface Protector All Purpose

    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites

BEST VALUE Self-Adhesive FEP over vinyl overlays protect work surfaces from virtually all corrosive chemicals and contamination.
All Purpose Type PROT18 is 0.001" FEP bonded to 0.008" self-adhesive vinyl. Working temperature range is 200 ºF.
Prevents radio-labeled chemicals from being absorbed into work surfaces.
  • Provides an inexpensive way to protect bench tops, counters, walls, fume hoods, tables, sinks, drains, conveyors, hoppers, chutes (virtually any surface) from corrosive chemicals. Also used as release surfaces, roll covers, mold liners and underlayment for chemical storage containers.
  • Easy to Fit - Easy to Apply. Works like contact paper, simply cut with scissors or knife to fit. Peel off backing material and press into place. Can be pulled up and repositioned if necessary.
  • Easy to Clean and Remove. Provides an easy to clean surface. Virtually nothing sticks to FEP.
  • Turns pitted, corroded or deteriorating surfaces into aesthetically pleasing, sanitary white work areas.
  • FEP displays unusually low liquid absorption values compared to other plastics. It absorbs practically no common acids or bases.
"Best value" standard roll.

Type PROT18 is a 0.001" FEB fluoropolymer film bonded to 0.008" self-adhesive vinyl. It's a general purpose surface protector that provides a corrosion resistant, smooth, glossy white surface that is impact absorbing and easy to clean. The working temperature range for Type PROT18 is recommended for applications up to 200 degrees F (93 degrees C).

Standard roll size: 25" x 15'



Self-Adhesive Vinyl Backed FEP


25 inch Wide x 15 foot Length


PROT18 All Purpose Vinyl


Surface Protector Data Sheet
(PDF, 102KB)

Home | About Us | Technical Info | Tradeshows | Product News | Contact Us

Jensen Inert Products • 3773 NW 126th Ave. Building 1 • Coral Springs, Florida 33065
Toll Free: 1-800-446-3781 • Tel: 954-344-2006 • Fax: 954-344-2008

At Jensen Inert Products customer service and satisfaction are our main objectives; therefore, if we can be of further assistance, please feel free to contact us:

Tedlar® is a registered trademark of E.I. DuPont.