Labware On Jensen Inert Products


		Fluoropolymer Vials (21) PFA vials with threaded closures designed primarily for storage of samples. Available with flat, conical and rounded inner style configurations. Some vials are molded with solid outside bottoms for use on hot plates. All vials also available in packs of 10 with tray. For vials with tray, add the letter "T" to the end of each catalog number for this configuration. All Plain Closure (Non-Septum) PFA vials available with PTFE liner inside closure. Add the letter "L" to the end of each catalog number for this configuration. Search Fluoropolymer Vials - 21 Items




		Distillation Apparatus III with Transparent Reaction Vessel (6) For distillation of strong alkalis or acids and for aggressive solvents. Can also be used for the distillation of pure liquids which should not come into contact with glass. An important advantage of this apparatus is the transparent reaction vessel with a large opening and a very smooth interior surface. Reactions, such as vaporization, boiling or bubbling, as well as the filling height, are visible in this reaction vessel. This apparatus can be heated by a heated bath, by an electric heating jacket, or on a hotplate, but should not exceed a temperature of 200°C in the reaction vessel. Stirring with a PTFE-coated magnetic stirring bar is possible when the flat bottom of this transparent reaction vessel is heated on a hotplate. The ...




		PTFE Manual Valves




		PTFE Sleeves for Glass Joint




		Dippers




		Film, Laboratory




		Funnels




		Transfer Containers (9) PFA, translucent Fittings molded into cover Ferruled nuts for tubing Pressure up to 5 psi Glass PP fixture allows up to 15 psi




		Glass Polypropylene Pressure Fixtures PFA, translucent Fittings molded into cover Ferruled nuts for tubing Pressure up to 5 psi Glass PP fixture allows up to 15 psi




		Spare Parts (4) PFA, translucent Fittings molded into cover Ferruled nuts for tubing Pressure up to 5 psi Glass PP fixture allows up to 15 psi




		Sieves and Dippers (3) PFA Chemically resistant Can be used for staining




		Polytetrafluoroethylene (PTFE) Utensils (15)




		Fluorinated Ethylene Propylene (FEP) Gloves (2) Transparent 0.002" thick




		Boiling Stones Chemware^® Non-contaminating Will not scratch Resistant to boiling acids, bases, and solvents




		Solid Balls (3) Chemware^® Non-contaminating Will not scratch




		Ladles, PTFE PTFE Ladles are totally chemically resistant and inert Shafts have a steel core, fully encapsulated in PTFE, for rigidity Suitable for sampling the most aggressive media




		Separator Adapters, PTFE PTFE Phase Separator Adapter with On/Off Valve installed in a polyethylene cap with solid PTFE liner for use on bottles. All wetted parts made of inert, non-contaminating PTFE and is unaffected by corrosive chemicals such as HF, HCL and HNO₃ On/Off Stopcock handle is easily turned with one hand to start and stop liquid flow Optional PTFE stem cap available to maintain cleanliness of stem when not in use Optional 1/4" ID fluoropolymer tubing, available from stock, can be attached to valve stem Stem size: Nominal 1/4" OD x 5/8" Length Standard sizes are 33-430 for use on standard 1 Liter Boston Round Bottles (not included) and 38-430. Other sizes available upon request.




		Raschig Rings, PTFE (2) PTFE Raschig Rings for Distillation come in two sizes to enhance the efficiency of random packing for chemical processes and liquid or gas transfer applications. Packing for distillation columns Chemically inert High surface area per unit of volume Minimum resistance to gas and liquid flow




		Rod, Virgin PTFE (39) Jensen Inert has a full line of Virgin PTFE Rods, ranging from 9/64" to 4" in diameter. Priced per foot and standard lengths are 6'. Search Rod, Virgin PTFE - 39 Items




		Scoop, PTFE Totally chemically inert Overall length 140 mm Use up to 280 ºC




		Spray Nozzels, PTFE




		Stopcocks, PTFE (11) Wetted parts are PTFE only Medium vacuum pressure performance Plug cannot be accidently removed All PTFE stopcock - inert, grease-free and unbreakable Supplied with borosilicate side arms Search Stopcocks, PTFE - 11 Items




		Test Tube Racks, PTFE (4) Inert to virtually all chemical reagents Suitable for repeatedly sterilizing Suitable for ovens and high temperature thermostats Use from cryogenic to 250 ºC (480 ºF) Standard "foot print" : 180 mm x 60 mm




		Tweezers, PTFE (6) Inert to virtually all chemical reagents Completely non-contaminating Use up to 280 ºC (540 ºF) Super smooth non-stick surface Available with sharp end or square end




		Trays, PFA




		Bending, PTFE




		Rods, TFE




		Aspirator, PTFE (12) PTFE Air & Liquid Aspirators are manufactured from virgin PTFE and are designed for efficient and rapid siphoning of hard to handle chemicals. Air Aspirators use clean dry shop air (CDA) or Nitrogen to initiate and sustain a natural or forced siphon. Applications include the draining and mixing of containment vessels and the removal of saturated waste chemistry. Air Aspirators are also used where recovery recirculation is desired in process chemistries. Liquid Aspirators use common city water or DI Water to aspirate and dilute harsh chemical baths. One common application is the dilution siphoning of Sulfuric Acid (H₂SO₄) used for chemical cleaning and etching. Air & Liquid Aspirators are sold as standalone ...




		Balls, PTFE (5) PTFE balls minimize "bumping" during boiling. They are inert and can be used up to 550 ºF (288 ºC). Each package contains100 balls. Choose from a variety of sizes. For column packing and mixing beds Resistant to most chemicals Non-contaminating




		Beading, PTFE (4) Use PTFE Beading as a cord or thread to sew mesh bags. Available in diameters from 0.028" to 0.094".




		Bottle Pourer, PTFE (4) Allows direct pouring in a safe and consistent manner Manufactured in pure, FDA approved, PTFE Totally chemically resistant and inert Safe & Reliable Sized to fit GL45, 38, 32 & 30 screw neck bottles Available with Blue, Red or Green caps, specify when ordering.




		Laboratory Matting, PTFE PTFE Laboratory Matting resists stains and adhesion of a wide range of materials and it is easy to clean. It can be used on benches, sinks, drain boards and shelves to reduce breakage of glassware. The laboratory matting has a diamond-shaped PTFE mesh and is 1/16" (1.6 mm) thick with 1/4" (6.35 cm) openings. Useful as a mesh bag for dipping parts in corrosive chemicals and solvents, it is also excellent as liner for cryogenic units. To create a bag, use PTFE Beading. Corrosion resistant Non-wettable Chemically inert




		Sieve, PFA Resistant to most chemicals, PFA Sieves are ideal for ultra-pure applications. The low surface energy of PFA facilitates quick drainage and clean up. Mesh size 1.0 mm. Use with containers that have openings of 80 mm or greater and a capacity ranging from 300 mL to 1000 mL. Non-contaminating and resistant to most chemicals Ideal for coarse sorting or draining of aggressive media Handle hooks over edge of vessel for draining




		Thermometer Holder/Probe, PTFE (16) Enables standard probes and thermometers to be assembled in standard taper laboratory glassware. The body is pure PTFE - fully adjustable with Viton^®seal. Contact materials are glass and PTFE only.

Jensen Inert Products • 3773 NW 126th Ave. Building 1 • Coral Springs, Florida 33065
Toll Free: 1-800-446-3781 • Tel: 954-344-2006 • Fax: 954-344-2008
Email: jensen@jenseninert.com

At Jensen Inert Products customer service and satisfaction are our main objectives; therefore, if we can be of further assistance, please feel free to contact us:

Tedlar® is a registered trademark of E.I. DuPont.