PRODUCTS:

Acid Purification System

Bailers

Bottles, PFA, FEP, and PTFE

Cap Liners, TFE

Check/ Foot Valves, TFE

Filters, Inline

Gas Sampling Bags

Gloves, Nitrile

ICP-MS Agilent OEM Components

Labware

Liquid Sampling Bags/Liners

Rods, TFE

Rupture Membranes, PFA

Savillex molded PFA labware

Sheets, TFE

Soil Sampling Syringes

Stirrer Magnets & Accessories

Surface Protector, Rolls

Transfer Cap Assemblies, PFA

Tubing

Join our Mailing List

* indicates required

Close

 

Search Catalog
      GO   
 All Categories    Gas Sampling Bags
Products of Fluoropolymers
& Other Non-Contaminating Materials
All Categories > Gas Sampling Bags  
 

Gas Sampling Bags


Click on a category to drill down.

ALTEF header

ALTEF Gas Sampling Bags


  •  Low VOC and sulfur background levels.
  • Similar stability properties as Tedlar® for a wide variety of compounds, including most VOCs.
  • Developed as an alternative to Tedlar® film for most gas sampling applications.
  • Suitable for sampling and analysis of most VOCs within 2 days, and many sulfur compounds for up to 24 hours.
  • Abrasion Resistant.
  • Chemically Inert to most acids, aliphatic and aromatic organic compounds, chlorinated solvents, and alcohols.
  • Contains no additives, fillers or pigments
  • Minimal adsorption. 
  • Superior storage for organics.
  • Inherently pure.

For more information about ALTEF Gas Sampling Bags please click on the links below:

ALTEF Product Sheet.

Capabilities Comparsion: ALTEF and Multi-Layer Foil bags.

Gas Sampling Bag Film Options.

Gas Sampling Bag Fitting/Valve Options.

inert 5 with locking combo valve

Multi-Layer Foil Bags


Chemical composition of Multi-Layer Foil bags.
(Listed from outer to inner layers)
1. 60 gauge Nylon
2. Polyethylene
3. .0003" Aluminum Foil
4. .002" Polyethylene 


Multi-Layer Foil Bags are ideal for containing low molecular weight gases. The 2 layers of aluminum film provide a great barrier to gases permeating through the walls of the bag.

For more information about Multi-Layer Foil Bags please click on the links below:

Multi-Layer Foil Bags Product Sheet.

Capabilities Comparsion, ALTEF and Multi-Layer Foil bags.

Gas Sampling Bag Film Options.

Gas Sampling Bag Fitting/Valve Options.

Gas Bags

FEP Gas Sampling Bags


  • Chemically Inert
  • Minimal Sample Loss
  • No Plasticizers
  • Reusable/Cleanable
  • Leak Tested
  • Non-Contaminating
  • Mechanically Strong


Gas Sampling Bags are available with various valves, fittings, configurations and materials.

Gas Sampling Bag Film Options.

Gas Sampling Bag Fitting/Valve Options.

Gas Bags

Tedlar® Gas Sampling Bags


 
  • Low Permeability
  • Chemically Inert
  • Minimal Sample Loss
  • No Plasticizers
  • Reusable/Cleanable
  • Leak Tested
  • Non-Contaminating
  • Mechanically Strong

Gas Sampling Bags are available with various valves, fittings, configurations and materials.

Gas Sampling Bag Film Options.

Gas Sampling Bag Fitting/Valve Options.

"C" Clamp Sealing Kits for Liquid and Gas Sampling Bags

"C" Clamp Sealing Kits for Liquid and Gas Sampling Bags

(6)
Polyethylene "C" Clamps and Sealing Rods can be cut to any length. To make an airtight, leak-proof seal, place the "C" Clamp, open side up, on a clean, hard surface. Wrap the open bag end once over the round plastic sealing rod and push the rod down into the "C" shaped opening of the "C" Clamp, inserting the middle of the rod first, then moving outward toward each end. We recommend ordering "C" Clamp Sealing Kits at least 1" longer than the length of the bag end to be sealed. The Rod in each unit (kit) is longer than the "C" Clamp, for easy removal.

 Customers who purchased Gas Sampling Bags also purchased: 


fep tubing04
FEP Tubing


"C" Clamp Sealing Kits for Liquid and Gas Sampling Bags
"C" Clamp Sealing Kits for Liquid and Gas Sampling Bags

Home | About Us | Technical Info | Tradeshows | Product News | Contact Us

Jensen Inert Products • 3773 NW 126th Ave. Building 1 • Coral Springs, Florida 33065
Toll Free: 1-800-446-3781 • Tel: 954-344-2006 • Fax: 954-344-2008
Email: jensen@jenseninert.com

At Jensen Inert Products customer service and satisfaction are our main objectives; therefore, if we can be of further assistance, please feel free to contact us:

Tedlar® is a registered trademark of E.I. DuPont.